7’ SMB - Surface Marker Buoy
![AC070-OR 7’ SMB - Surface Marker Buoy Orange - Inflated](https://images.squarespace-cdn.com/content/v1/55031996e4b0562b390e52e4/1665169104646-B5EPNSU58M6TWJSR2KCO/AC070-OR-7%27-SMB-1.jpg)
![AC070-OR 7’ SMB - Surface Marker Buoy Orange - Rolled Up](https://images.squarespace-cdn.com/content/v1/55031996e4b0562b390e52e4/1665169107179-JOLZS3PQWFR7IR801HUS/AC070-OR-7%27-SMB-2.jpg)
7’ SMB - Surface Marker Buoy
This large, 7 ft (2.1 m) SMB is the one you want when you know that you will be diving in a location known for strong wind and currents. The large diameter will help keep it vertical in adverse conditions and and will be more easily seen by boats.
7 ft (2.1 m) long x 15 in (381 mm) circumference, 5 in (127 mm) diameter
Mil-Spec, urethane backed, nylon material
SOLAS reflective tape on both sides for maximum visibility
Elastic loop at top for chemical light attachment
Stainless steel D-ring at top for slate attachment
Lifting handle at top of tube
2 in (50 mm) diameter over pressure relief valve with pull for manual release
Combination oral and BC QD inflator
Anti-spill bottom with baffle to allow easy fill from any second stage
Lifting strap with stainless steel D-ring at bottom
18 in (46 cm) step-thru leg harness with stainless steel D-ring
50 lbs (23 kg) of positive lift
p/n
AC070-OR