Modular Valves

• Modular valves are clean for pre-blended Nitrox up to 40% FO2
• Modular valves are set for 3000 psi service pressure
• Modular valves have a 3/4" x 14 NPSM inlet thread
• Double barrel o-ring adjustable cross bars
• Burst discs are available to change the service pressure
• PRO Outlet - Yoke outlet with spin-out adapter to 230 bar DIN
• DIN Outlet - Dedicated 300 bar DIN outlet

Right Hand	Cross Bar	Left Hand

- The above components can be combined
to make the manifolds below -

		Right handed (R) components can be combined to make H valves

		Left handed (L) components can be combined to make H valves

Modular plugs can be installed into the valve barrel when the H-adapter is removed, or when manifolds are disassembled for single tank usage. Modular valves contain a valve plug when shipped from XS Scuba.
Right Hand VPLUG-R This nut has small "notches" perpendicular to wrench flats to identify the Right Hand (R) designation
	Left Hand VPLUG-L This nut does not have the small "notches" to identify the Left Hand (L) designation