Scuba Multi Tool

  • A. Valve DIN Insert 1/4" Hex Wrench
  • B. Port Plugs 3/16" Hex Wrench
  • C. Valve Dip Tube 5/32" Hex Wrench
  • D. Valve Nut Slotted Screwdriver
  • E. Phillips Screwdriver
  • F. Inflator Schrader Valve Tool
  • G. Bronze O-ring Pick
  • H. Orifice Adjustment Flat Screwdriver

P/N TL110

1


1

Star Tool

  • Remove and replace the most common scuba hoses
  • 1/2", 9/16", 5/8" & 11/16" wrenches
  • Most common hex wrenches 5/32", 3/16" & 1/4"
  • Valve handwheel driver
  • All imperial sizes for US products
  • Compact size - 3.85" x 0.5" thick (approximately)
  • Stainless steel construction with silicone over mold

P/N TL127

1


1

Scuba Wrench Set

  • Three combination wrench set
  • 1/2" by 7/16", 5/8" by 1/2"
    and 11/16" by 9/16"
  • Fit for most common regulator hoses
  • Stainless steel construction
  • 6" wrench length
  • Perfect for any diver's save-a-dive kit

P/N TL125

1


111

O-Ring Pick Set

  • Ideal for o-ring removal without causing damage
  • Soft bronze tips - three designs
  • Perfect for any diver's save-a-dive kit
  • Now includes a tube of silicone grease and two application brushes

P/N TL111

1


1

Diver's ToolMaster

  • Stainless steel construction
  • 6 wrenches:
    1/2", 9/16", 5/8", 11/16", 13/16", 15mm
  • 3 screwdrivers: 1/8", 1/4" Flat, #1 Phillips
  • 2 Allen keys: 3/16", 5/32"
  • 1 scratch awl
  • Overall size: 4.5" L x 1" D x 1" W

P/N TL103

1


1

Intermediate Pressure Gauge Checker

  • Easy to read 2" diameter XS Scuba gauge
  • 0 to 300 psi dial
  • Stainless steel case
  • 1.5% accuracy throughout the full range
  • Liquid silicone filled for dampening
  • Air buble to allow for expansion with temperature change
  • Protective rubber boot

    Push Button Bleeder
  • Quick and easy pressure relief
  • O-ring seal
  • Easy to service

    STD OPV
  • Over pressure relief valve set at 200 psi
  • Prevent gauge damage

    Spin-On Adapter
  • All ows fast attachment to standard BC QD hose
  • Fast spin-on adapter - seals with o-ring
  • Black anodized aluminum

P/N AC380

1


1

Regulator Inline Adjuster

  • Adjust the low pressure orifice while the second stage is pressurized
  • Two drives allowing compatibility with nearly all second stages
  • Reversible, one end with with a 0.32" slotted drive and the other with a tapered 5mm hex drive
  • Low pressure gauge included for display of the intermediate pressure
  • Finger tight spin-on attachment for quick service

P/N TL121

1


1

Yoke Retainer Socket Set

  • Accurately torque yoke retaining nuts
    back to factory specifications
  • These sockets are specifically manufactured
    to fit within the confines of the yoke
  • Includes a 1" and a 3/4" socket, both
    with 3/8" drive
  • Includes a 3/8" drive 3" extension with
    a reduced shank diameter of 0.45"
  • Allows use with 1/2" and larger yoke screw holes

P/N TL123

1


1

Highland Inflator Tool

1

  • Perfect field service tool
  • Service for Highland Inflator
  • Internal spanner for power inflator button
  • Stainless steel construction

P/N TL126

1


1

Regulator Cover Removal Tool

  • Easy removal of second stage front covers
  • Silicone material provides excellent grip
  • Fits most manufacturer's second stages

P/N TL117

1


1

Regulator Support Handle

  • Heavy-duty chromed brass construction
  • Stainless steel threaded ends
  • One end with standard high pressure port threads 7/16-20 UNF male threads
  • The other end with standard low pressure port threads 3/8-24 UNF male threads
  • Ready for vise mounting with flat sides in the middle section

P/N TL122

1


1

Spanner Wrench

  • Adjustable range is 0.75" to 2.0"
  • Three pins included: 0.185", 0.152" and 0.122"
  • Fits most manufacturer's first stages

P/N TL118

1


1

BC Washout Hose

  • Fits inflators with standard male QD nipple
  • Attach large end to garden hose
  • Attach small end to inflator QD nipple
  • Depress the power inflator button
  • Turn on garden hose for light flow
  • Fresh water will flow into the BC
  • Fill about half way
  • Give the BC a good shaking
  • Invert the BC, drain the water and debris out by depressing the oral inflator button
  • Inflate and allow to dry before storing
  • Wash the inside of your BC often

P/N TL112

1


1

BC Repair Kit

  • Repair holes in polyurethane laminated nylon
  • Repair holes in polyurethane bladders
  • Repair holes in PVC products
  • PU, PVC and Nylon/TPU patches included

P/N TL115

1


11

Schrader Valve Tool

  • Easy removal and installation of Schrader valves
  • Fits most manufacturer's QD BC hoses

P/N TL116

1


1

Christo-Lube MCG 111

  • Oxygen compatible lubricant
  • Convenient syringe applicator
  • Two ounces of lubricant

P/N TL108

1


11

Silicone Lubricant

  • MCG 208 silicone lubricant
  • Two ounces of lubricant
  • Not oxygen compatible

P/N TL109

1


1

ZRC Galvanizing Spray

  • Protect steel cylinders and other steel products from rust
  • True galvanic protection
  • Cold galvanizing zinc compound
  • 12 ounce aerosol can
  • Color: matte gray

P/N TL109

1


1

Pit Depth Probe Kit

  • Are you tired of trying to guess how deep a corrosion pit is on a scuba cylinder?
  • No more scrapping with a long pick and comparing to a reference disc
  • This tool allows user to precisely measure and record the depth of internal and external corrosion pits on scuba cylinders
  • Each probe (internal and external) contains a spring-loaded gauge
    wire coupled to a linear encoder
  • Video feed from internal probe gives user a close up view of pit area
  • Works with the current Visual Plus 3 software
  • Package contains internal & external probes, all cables, software and a main processing unit
  • Requires PC computer

P/N TL124

1


1

Tank Tool - Aluminum Cylinder

  • For aluminum scuba cylinders only
  • Two tools in one
  • Clean and true threads with 420 stainless steel chaser
  • Remove corrosion from o-ring gland
  • Replaceable adhesive backed sanding discs
  • Includes 6 sets of sanding discs

P/N TL101

1


1

Visual Plus 3

  • The best cylinder inspection technology you can buy today
  • Non-destructive eddy current inspection device for aluminum cylinders
  • Eliminates human error, easy, fast and accurate
  • Five different color coded graphs; linear and 3-D views on your computer screen
  • Operates with any computer using Windows 98 or later operating systems
  • Automatically stores all required data by DOT
  • Endorsed by Worthington and Luxfer cylinder manufacturers

P/N TL107

1


1

Optical Plus

  • The brightest and most powerful optical
    instrument for cylinder thread inspection
  • 4x magnification
  • Adjustable focus
  • Adjustable light intensity
  • Vertical adjustment and 360?rotation
  • Rugged, anodized aluminum construction

P/N TL106

1


1

Scuba Valve Tester

  • Fast and easy valve testing
  • Manufactured for in-water testing
  • Attach yoke to high pressure source
  • 60" high pressure rubber hose
  • Standard 3/4" x 14 NPSM threading
  • Use adapters on page 187 for valves with different threads

P/N TL119

1


11


Tank Muffler

  • Drain it quiet
  • Drain it slow
  • Drain it safe
  • Attach to DIN or Yoke Style valves
  • Exhaust holes on opposite side of XS Scuba logo
  • All brass construction

P/N AC368

1


11

TEST ADAPTER XS AIRE
& SPARE AIR

  • 3/4-14 NPSM Male to 5/8-18
    UNF Female

P/N TL119-58


TEST ADAPTER 1/2" PIPE
THREAD VALVES

  • 3/4-14 NPSM Male to 1/2"
    NPT Female

P/N TL119-12


TEST ADAPTER SMALL THREAD "GENESIS" VALVES

  • 3/4-14 NPSM Male to 7/8-14
    UNF Female

P/N TL119-78

1


11

Valve Handwheel Tool

  • Easy removal and installation of valve handwheel nuts
  • Fits most manufacturer's valves

P/N TL113

1


1

LED VIP Inspection Light

  • Twenty bright LED lights
  • Flexible 14" wand
  • 120V AC plug-in
  • 12V DC transformer
  • 60" cord

P/N TL105

1

Everything for the Perfect Dive

Home | Product Guide | Dealer Locator | Contact Us
Company Profile | Support | Search | Dealers Only

©2013 XS Scuba. All rights reserved.